The core lathe uses rod raw materials processed into small parts, large batch, many are a molding parts. As long as it is involved in bar processing, the diameter is less than 42mm, the machine with automatic feeding machine can obtain a huge advantage, the machine with automatic feeding machine is a small independent production line, whether it is processing speed, labor cost, there are huge advantages.

The main difference between the machine and the machine is that the material of the machine is moving while the machine is moving. The machine is also known as longitudinal cutting lathe, turn-milling compound lathe, Swiss lathe. Mainly used for holding small parts, mass processing. Generally, the feeder will pass the rod from the main shaft through the hole, and the spring chuck is automatically clamped. If the parts are suspended elongating, it is necessary to match a long material feeder or use a double spindle to walk the scheming machine, and use the back shaft to support the material. If the tail needs to be machined, a second spindle is needed. Walk huge advantage is the support for all four square, hexagon, such as straight bar stock of raw materials, and dividing spindle positioning function go all main is limited by the diameter of the material, most commonly go heart of lathe parts processing only 42 mm in diameter, the diameter of the biggest domestic support was built in nanjing now g machinery co., LTD takes the lead in development of ZA - 32 series, The maximum diameter can be processed within 32mm. As long as it is the parts that can be processed by the scheming machine, the machining accuracy, the processing speed and the cutting machine are difficult to be mentioned in the same way!

The main advantages are as follows:

1, a clamping spindle can turn more than 200mm long parts, if you are a 5mm long parts of the car, the knife can go to the heart of the car, but the heart can go out of 20~30 parts need to stop feeding

2, the core lathe cutting always in the material fixed in the nearest position, so the rigidity is very good, you think about your lathe clamping parts, the tool stuck to the clamping position of a few mm place to turn, the rigidity will be good to what extent.

3, the machine is one of the milling, a processing and molding of the complexity of the cutter than the original old automatic car, we commonly known as CAM locomotive bed. And now more advanced CNC automatic lathes, we call the core lathe or scuttling lathe. The main axis Z is moving forward and back, and the knife can move X, Y, can realize three-dimensional processing, a molding.